Loading ...
Loading ...
Loading ...
Getting Started
R&S
®
MXO 5 Series
37User Manual 1802.3369.02 ─ 02
3.2.4.3 Horizontal controls
The rotary knobs in the Horizontal functional block adjust the horizontal parameters.
These settings are effective for all channel waveforms. In addition, a [Zoom] key is
available.
[Position]
The rotary knob changes the horizontal position of the waveforms. Turn clockwise to
move the waveforms to the right. To set the value to zero, press the knob. The current
value is shown in the "Horizontal" label above the diagram.
The horizontal position defines the zero point of the diagram. It is the time distance to
the reference point, which marks the rescaling center of the time scale.
[Scale]
The rotary knob adjusts the time scale for all signals. The time scale is also known as
timebase.
Turn clockwise to stretch the waveforms. Doing so, the scale value time/div decreases.
Press the knob to toggle between coarse and fine scale adjustment.
[Zoom]
Activates a zoom and supports the zoom setup.
If no zoom is on, the first press opens a zoom diagram for the active diagram. If at
least one zoom is shown, the keypress opens the "Zoom" dialog. If only one zoom is
defined, the next press closes the dialog and removes the zoom. If several zooms are
defined and the dialog is open, the key toggles the zooms.
3.2.4.4 Vertical controls
The keys and knobs in the Vertical functional block select a signal and adjust the verti-
cal scale and position of the selected signal.
Instrument tour
Loading ...
Loading ...
Loading ...