Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 5 Series
538User Manual 1802.3369.02 ─ 02
Parameters:
<VerticalScale> Range: 1E-15 to 1E+26
Increment: 1E-05
*RST: 0.5
Default unit: Unit of the source waveform
Usage: Asynchronous command
Manual operation: See "[Scale]" on page 39
REFCurve<rc>:POSition <VertPosi>
Available, if REFCurve<rc>:VMODe is set to INDependent.
Moves the reference waveform up or down in the diagram.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<VertPosi> Range: -1E+26 to 1E+26
Increment: 0.02
*RST: 0
Default unit: div
Usage: Asynchronous command
Manual operation: See "Vertical position" on page 181
REFCurve<rc>:HMODe <HorizontalMode>
Selects the coupling of horizontal settings.
Suffix:
<rc>
.
1...8, index of the reference waveform
Parameters:
<HorizontalMode> ORIGinal | COUPled
ORIGinal
Horizontal scaling and reference point of the source waveform
are used.
COUPled
The current horizontal settings of the diagram are used.
*RST: ORIGinal
Usage: Asynchronous command
Manual operation: See "Mode" on page 183
REFCurve<rc>:RESCale:HORizontal:FACTor <ScaleFactor>
Sets the horizontal scale factor. A factor greater than 1 stretches the waveform hori-
zontally, a factor lower than 1 compresses the curve.
Waveform analysis
Loading ...
Loading ...
Loading ...