Loading ...
Loading ...
Loading ...
Pad XLR -20dB
The -20dB pad option gives you added control to further reduce the input gain levels on your
URSA Broadcast G2’s XLR audio inputs when shooting in a loud environment even after your
input levels are already turned down.
Pad Cam Mic - 15 dB
The -15dB pad option gives you added control to further reduce the microphone input gain
levels on your URSA Broadcast G2’s internal microphone when shooting in a loud environment
even after your input levels are already turned down.
Cam Mic Low Cut Filter
Tap this switch icon to enable the low cut filter for your camera’s internal microphones. This filter
helps to reduce potential wind noise or low frequency rumbling that may occur in exterior
shooting conditions. Note that the ‘pad cam mic -15 dB’ selector must be switched off for this
function to work.
Audio Settings 2
The second page of your URSA Broadcast G2’s ‘Audio’ tab contains the following settings.
Audio Meters
You can choose from two different audio meter display types.
VU The VU meter, or ‘volume units’ meter, averages out short peaks and troughs in your
audio signal. If you are using VU metering, adjust the input levels on you Blackmagic
URSA Broadcast G2 so that the meter peaks at the 0db indicator on the audio meter.
This maximizes the signal to noise ratio and ensures your audio is at the highest quality.
If your audio peaks beyond the 0dB indicator there is a high risk of sound distortion.
PPM PPM meters, or ‘peak program meters’ displays a ‘peak hold’ feature that momentarily holds
the signal peaks and a slow fall back so you can easily see where your audio is peaking.
97Settings
Loading ...
Loading ...
Loading ...