Loading ...
Loading ...
Loading ...
Tools Required
When attaching the F mount, you will need a 2mm Hex driver. While it’s not absolutely required,
we recommend using a torque wrench able to accurately set a maximum torque of 0.45Nm to
reduce the potential of over tightening the screws.
2mm Hex driver
Attaching the F Mount
1 2
Place Blackmagic URSA Broadcast G2 vertically on
a solid, clean bench top to ensure the mount can be
attached vertically. If changing from the PL to the F
mount, ensure that you have removed the PL baffle
before inserting the F mount.
Carefully place the Blackmagic URSAMiniPro
Fmount onto the camera bodyensuring the
whitedot is atthe2o’clock position.
3 4
1 3
4 2
Loosely turn the four mounting screws until initial
contact is made with the shoulder of the lens mount.
Using the 2mm Hex driver, or torque wrench with
2mm Hex key, apply one full turn of pressure to
mounting screw 1, followed by one full turn to screw
2, and repeat for screw 3 and then 4. Continue to
apply one full turn to each screw in the sequence
above until all screws have reached the maximum
torque of 0.45Nm.
194Interchangeable Lens Mount
Loading ...
Loading ...
Loading ...