Loading ...
Loading ...
Loading ...
Talkback Pinout Diagram
Pins Signal Specifications
1 ENG(R) IN+
Engineering channel input
0dBu balanced
2 ENG(R) IN-
3 ENG GND GND for ENG
4 ENG(T) OUT +
Engineering channel output
0dBu balanced
5 ENG(T) OUT -
6 PGM IN+ -20dBu
7 PGM IN- -20dBu
8 PGM GND -20dBu
9 GND GND for aux
10 N/C –
11 Red Tally IN On = 5-24Vdc, Off= 0Vdc
12 Red Tally GND –
13 GND Chassis GND
14 PROD(R) IN+
Production channel input
0dBu balanced
15 PROD(R) IN-
16 PROD GND –
17 PROD(T) OUT+
Production channel output
0dBu balanced
18 PROD(T) OUT-
19 N/C –
20 N/C –
21 N/C –
22 N/C –
23 N/C –
24 Green Tally IN On = 5-24Vdc, Off= 0Vdc
25 Green Tally GND –
PTZ Interface
Both the studio unit and camera unit has a DE-9 connector so you can connect a PTZ controller
at the studio end, and the remote head at the camera end. The PTZ commands are embedded
in the SDI signal connected between the units via the SMPTE fiber cable.
The settings menu on Blackmagic Studio Fiber Converter lets you select the source of PTZ
commands that are sent to your Blackmagic Camera Fiber Converter. You have the option to
select from the PTZ connector on the back of the Studio Fiber Converter or a program SDI feed
coming from an ATEM Switcher instead. For more information, refer to the ‘operating the studio
fiber converter’ section.
186Studio Unit Connections
Loading ...
Loading ...
Loading ...