Loading ...
Loading ...
Loading ...
Simply press the menu wheel as you would a button to access your URSABroadcastG2’s
head up display on an external monitor such as Blackmagic SmartView, Video Assist or
URSA Viewfinder. While the menu wheel is active, turn the wheel to select features
such as LCDmonitor options, frame rate, ISO, white balance and tint. Press the wheel to
confirm selections and make additional changes, and use the ‘back’ button next to the
wheel to cancel. You can also use the back button to move up a menu level, or exit the
menu completely if you’re at the top level. The menu will automatically close after one
minute of inactivity.
For more information on setting status text and the controls available, see the
‘touchscreen controls’ and ‘monitor settings’ sections of this manual.
5 Lock
Toggle this switch to lock all of the controls on the forward control panel to prevent
them from being accidentally adjusted while shooting. Move this switch to the lower
position to lock, and the upper position to unlock.
TIP When shooting in busy or uncontrolled environments, you can lock your
URSA Broadcast G2’s forward control panel when you leave your camera
unattended. Thisensures that your settings are not changed unintentionally
byothers.
6 ISO, Shutter and White Balance Switches
These small switches are used to adjust your ISO/Gain, white balance, and shutter
settings. They are helpful when you want to make fast adjustments without taking your
eyes off the shot. Gently push the switches up or down to make setting adjustments.
Theswitches are spring loaded so they always return to a neutral position.
ISO/Gain
Push this switch up or down to adjust your camera’s gain setting. Pushing up will
increase the setting by 1/3 stop, and pushing down will decrease by 1/3 stop.
Theavailable settings range from -12 to 36dB.
Shutter
Use this switch to adjust the camera’s shutter speed. Pushing up will increase the
shutter speed to the next available preset, and pushing down will decrease to the next
available preset. Holding the switch up or down will move more quickly through
available values. There are twelve shutter speed presets between 1/24and 1/2000.
TIP Your URSA Broadcast G2 can also suggest flicker free shutter speeds
based on the power frequency in your region. These must be selected
through the LCDtouchscreen menu. For more information see the
‘touchscreencontrols’ section in this manual.
White Balance
This switch is used to adjust the camera’s white balance. Pushing up will increase the
color temperature by 50K, and pushing down will decrease it by 50K. Holding the
switch up or down will move more quickly through available values.
7 Auto White Balance
Pressing this button will reveal a white ‘auto white balance’ box in the center of the
LCDfor five seconds. This box will also appear on any SDI output that has ‘status text’
48URSA Broadcast G2 Controls
Loading ...
Loading ...
Loading ...