Blackmagic Design CINEURSAMWC6KG2 User Manual

Loading ...

Color Bars

Outputting color bars rather than a preview image can be useful when connecting your

URSABroadcast G2 to a switcher or external monitor. The appearance of your URSA Broadcast

G2’s color bars onyour switcher or monitor confirms the connection, and you can perform basic

monitorcalibration based on the colors of the bars. To turn on color bars for all outputs on

yourURSABroadcast G2, including the LCD touchscreen, simply tap the ‘color bars’ switch icon.

Reference Source

This setting is used to select the reference source. Your URSA Broadcast G2 can lock to an

internal or external reference source, or to the reference signal in the program input from an

ATEM switcher. Ifyou are using your URSA Broadcast G2 with an ATEM Switcher’s camera

control function, you should always set your reference source to ‘program’ unless the switcher

itself and all connected cameras are set to an external reference.

NOTE When you are setting your reference source for URSA Broadcast G2, you may

experience a small dropout on your camera’s outputs when switching between your

reference sources. This is because the camera is adjusting its referencing timing to

match that of the external source. For this reason it is important not to change this

setting during a production and only while setting up.

Reference Timing

These settings allow you to manually adjust the reference timing on a line or pixel basis. Simply

tap the arrow icons on either side of the “lines” and “pixels” settings to make adjustments.

Setup Settings Page 3

The third page of your URSA Broadcast G2’s ‘setup’ tab contains the following settings.

Program Audio Source

When connected to an ATEM switcher, setting ‘program audio source’ to ‘switcher’ prioritizes

the program return audio as your input source to be mixed with talkback when monitoring using

headphones or a headset. This is useful when you are not feeding the switcher audio from your

camera but you still want to listen to the program feed from the switcher via the ‘SDI in’ port.

Setting ‘program audio source’ to ‘AFV’ prioritizes audio from your camera’s internal mics or

‘audio in’ XLR ports, and is the default setting.

Program Mix

This setting changes the balance of camera sound to talkback sound. The headphones will

output audio following what is displayed on the LCD. For instance, if you are in camera view,

101Settings

Loading ...

Blackmagic Design CINEURSAMWC6KG2 URSA Broadcast G2 Camera