Loading ...
Loading ...
Loading ...
TIP You can change the opacity of frame guide overlays. For more information see the
‘monitor settings’ section of this manual.
NOTE For information on enabling frame guides on your camera’s front and main
SDIoutputs, see the ‘monitor settings’ section in this manual.
Grids
The ‘grids’ setting toggles the appearance of a rule of thirds grid, crosshair or center dot on
theLCD touchscreen, as well as setting the overlay that will be visible on all URSA Broadcast
G2’s outputs.
Tap the ‘grids’ icon while accessing ‘LCD monitor options’
toaccess your URSA Broadcast G2’s grid settings
Grids and crosshairs are overlays that can help with image composition. When ‘grids’ are
enabled, your URSA Broadcast G2 can show a rule of thirds grid, crosshairs, or center dot.
To toggle the appearance of grids on your URSA Broadcast G2 touchscreen, tap the switch icon
inthe bottom left of the screen while in the ‘frame guides’ tab.
When your URSA Broadcast G2 is set up and connected to an ATEM switcher as the current
program source, and ‘grids’ are set to ‘on’, the red ‘program’ tally outline will automatically
illuminate on the LCD.
When connected to an ATEM switcher sending a tally signal, a red border will
appear around your camera’s image preview when grids are set to ‘on’
To set which overlay you want to display on all URSA Broadcast G2 outputs, tap the ‘thirds,’
‘crosshairs,’ or ‘center dot’ options.
62Touchscreen Controls
Loading ...
Loading ...
Loading ...