Loading ...
Loading ...
Loading ...
Removing the B4 Mount
To remove the B4 mount, simply unscrew the five M3 Hex screws using a 2mm Hex driver.
The B4 mount is removed by unscrewing the five M3 Hex screws and lifting the mount from the camera body.
NOTE When removing the original B4 mount, make sure the shim underneath the
mount always stays attached to your camera.
Keep reading this section for details about the PL, B4, and EF lens mount kits and how to install
each mount to your URSA Broadcast G2.
Blackmagic URSA Mini Pro EF Mount
The EF mount lets you attach EF stills lenses to your URSA Broadcast G2.
The EF mount kit includes:
1x EF mount
The EF mount lets you attach common EF stills lenses.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm
0.30mm
0.20mm
0.18mm
0.15mm
0.12mm
0.10mm
0.05mm
0.025mm
1x Baffle tool
The baffle in the EF mount is not removable, however we have
included a baffle tool in the EFkit as a spare item you can use
if you also have the PL mount.
4 x 2mm Hex M3 x 18mm mount screws
The four M3 x 18mm Hex screws are exclusive to the EF mount so
you can keep the screws together with the respective mount.
190Interchangeable Lens Mount
Loading ...
Loading ...
Loading ...