Loading ...
Loading ...
Loading ...
SSD
The ‘SSD’ indicator shows the status of the SSD currently inserted. This LED provides the
following status indicators:
White Your URSA Mini Recorder will show a solid white light when powered on and
communicating with your URSA Broadcast G2.
Red Your URSA Mini Recorder will show a red light while it is recording to SSD. When
the space on your SSD is running low the red light will begin to flash slowly.
A fast flashing red light indicates that SSD is dropping frames. If this happens please
check that you are using a disk from our recommended list of SSDs and that you are
recording at a data rate that is compatible with your media.
Orange If a problem has occurred while mounting the SSD the status light will go Orange. This
may be the result of an improperly formatted or incompatible SSD. See the ‘storage
media’ section in this manual for a list of compatible SSDs and formatting instructions.
TIP If the ‘SSD’ LED indicates a drive mounting error it may need to be ‘initialized’ on a
mac or PC using disk utility or disk management.
Updating URSA Mini Recorder’s internal software
Update your URSA Mini Recorder using the Blackmagic Camera Setup Utility software.
The MiniRecorder will need to be powered when updating, so we recommend keeping the
MiniRecorder connected to URSA Broadcast G2 during the update process. This also means
your camera will need to supply consistent power, so be sure to plug into external power or
battery pack.
Connect your computer to the Mini Recorder with a USB-C cable and launch Blackmagic
Camera Setup Utility. You will be prompted to update if your computer detects that your
URSAMini Recorder is using outdated version. Follow the on screen prompts to update your
URSA Mini Recorder’s internal software. Refer to the ‘Blackmagic Camera Setup Utility’ section
in this manual for more information.
TIP We recommend updating all your Blackmagic URSA equipment at the sametime
foroptimized performance.
206URSA Mini Recorder
Loading ...
Loading ...
Loading ...