Loading ...
Loading ...
Loading ...
LCD Only
Display
Instead of a histogram and audio meters, your URSA Broadcast G2 can display codec
and resolution information at the left and right bottom edges of the LCD touchscreen.
This can be useful if you prefer to use false color for dialing in exposure, or are
recording audio separately and want to display additional information in the space
normally used by the histogram and audio meter. Simply tap ‘meters’ or ‘codec and
resolution’ in the ‘LCD’ menu to select your preferred view.
Front SDI and Main SDI
Display Status Text For Cinematographer or Director
The LCD touchscreen displays information such as ISO, white balance, and aperture
that is useful to a camera operator or cinematographer setting up individual shots on
that camera. Your camera’s SDI output, however, can also show information useful to
a director or script supervisor who is keeping track of multiple shots or cameras.
Setting the status text to ‘director’ in your URSA Broadcast G2’s ‘front SDI’ or ‘main SDI’
monitor settings changes the status text for that output to show the following information.
FPS
Displays the currently selected frames per second. If off speed frame rate is disabled,
only the project frame rate will be shown. If an off speed frame rate is being used, the
sensor frame rate will be shown, followed by the project frame rate.
CAM
Displays the camera index as set in your URSA Broadcast G2’s Slate. See the ‘slate’
section in this manual for more information.
OPERATOR
Identifies the camera operator as set in your URSA Broadcast G2’s Slate. See the ‘slate’
section in this manual for more information.
DURATION DISPLAY
Displays the duration of the current clip, while recording, or the last recorded clip in the
following format: hours:minutes:seconds
REEL, SCENE, TAKE
Displays the current reel, scene and take. For more information on reels, scenes,
takes and their labelling conventions, refer to the ‘slate’ section in this manual.
DYNAMIC RANGE
The bottom left hand corner of the monitor displays your URSA Broadcast G2’s
currently applied LUT, if applied to that output. If no LUT is applied, ‘film’ or ‘video’
dynamic range will be displayed.
92Settings
Loading ...
Loading ...
Loading ...