Loading ...
Loading ...
Loading ...
You can configure which audio channels from the Camera Fiber Converter get mapped
to the embedded SDI and XLR outputs. The embedded audio channels from URSA Mini
or URSA Broadcast G2 are on channels 1 and 2 by default. Line or Mic level XLR inputs
that are plugged into the Camera Fiber Converter are mapped to channels 3 and 4 by
default. You can adjust the output channel settings to change these mappings from
their default settings. If either of the XLR inputs on the Camera Fiber Converter are set
to AES, this expands your channel mapping options to include channel 5 and 6, which
are sent on your embedded SDI output.
Mapping the embedded XLR channels from the camera to output channel 1 and 2
Talkback
Use the ‘talkback’ menu to select your program audio source and talkback source for
the production and engineering channel. Set the talkback source to ‘SDI + DB25’ or
‘intercom tally DB25’ on your Studio Fiber Converter.
You can also adjust the ‘headphone gain’ and ‘headset microphone gain’ for each
intercom headset to account for the impedance levels of the headsets. The ‘phantom
power’ settings let you switch on the phantom power being sent to the respective
headset. Adjust the ‘sidetone level’ settings to let camera operators hear their own
voice in their headset at a clear and comfortable level.
174Operating the Studio Fiber Converter
Loading ...
Loading ...
Loading ...