Loading ...
Loading ...
Loading ...
10 Monitor Speaker
The small speaker built into the outside control panel lets you monitor audio when in
playback. It is located where your ear would normally be when shooting with the
camera on your shoulder.
To adjust the volume of the speaker, simply rotate the settings wheel as described in
the ‘URSA Broadcast G2 Controls’ section.
11 Monitor Channel Select
Your URSA Broadcast G2 supports two channels of audio.
12 Lock
Use this switch to lock all of the settings on your URSA Broadcast G2’s ergonomic
control panel. The only controls that will remain active while the lock switch is ‘on’
arethe monitor channel select switches.
13 Status LCD
This display shows you your URSA Broadcast G2’s essential settings at a glance,
without needing to open the internal touchscreen. This screen is designed to be
visibleeven inbright daylight. The following information is available:
Timecodes
Your URSA Broadcast G2 displays three timecodes. If you have an external timecode
connected, this will be shown under the ‘ext’ indicator in the top left of the status LCD.
Your camera’s internally generated timecode is shown next to this under the ‘gen’
indicator. Both the external and generated timecodes are shown in hours, minutes,
seconds and frames.
The larger, main timecode indicator displays your current timecode as either clip
duration or timecode. You can switch between these two display modes by pressing
the ‘timecode’ button underneath the status LCD.
Battery indicator
If your URSA Broadcast G2 is running on battery power, this indicator displays remaining
battery life in 25% increments. Each of the battery indicator’s four bars corresponds to
Battery indicator
Audio metersCard indicatorIris
Low record
time remaining
FPS, Shutter Angle, White Balance
Record
indicator
Timecodes
ISO/Gain
Dropped
frame
indicator
50URSA Broadcast G2 Controls
Loading ...
Loading ...
Loading ...