Loading ...
Loading ...
Loading ...
Focus Assist
The ‘focus assist’ setting toggles the appearance of peaking on the viewfinder. You
have the choice of ‘red’, ‘green’, ‘blue’, ‘black’ and ‘white’ as well as traditional peaking.
Frame Guide
Gives you the option to show ‘frame guides’ as part of your Studio Viewfinder’s ‘Guides’.
When connected to URSA Broadcast G2 they will match your camera’s ‘frame guides’
aspect ratio. When connected to other systems they will default to the 14:9 aspect ratio.
Safe Area Guide
Gives you the option to show the ‘safe area’ indicator as part of your Studio Viewfinder’s
‘Guides’. When connected to URSA Broadcast G2 these will match your camera’s ‘safe
area guide’ percentage. When connected to other systems they will default to 90%.
Grid
Gives you the option to show grids as part of your Studio Viewfinder’s ‘Guides’.
Whenconnected to URSA Broadcast G2 these will match your camera’s ‘grids’
settings. When not connected, this will switch your crosshairs on or off.
LCD Brightness
If you have the updated model of URSA Studio Viewfinder then the LCD Brightness
setting will appear at the bottom of the setup menu. This adjusts your Studio Viewfinder
LCD backlight brightness.
Cursors
The cursors allow you to mark an area on screen where graphics like a lower third, graphic,
logo or ticker will be overlaid. To adjust these cursors go to ‘cursors’ and select ‘edit cursors’.
This will bring up a page that shows you all three cursors and allows you to select each one
individually and then dial in the width, height, x and y co-ordinates for positioning each
oneindividually.
The cursors submenu
144Blackmagic URSA Studio Viewfinder
Loading ...
Loading ...
Loading ...