Loading ...
Loading ...
Loading ...
Additional status indicators may appear around the duration display:
Appears to the right of the duration display when showing timecode.
Appears to the right of the duration display if an external timecode is connected and valid.
Appears to the right of the duration display if the camera is running off an internal timecode
after being ‘jam synced’ anddisconnected.
Appears to the right of the duration display when you are viewing preset record run timecode.
Appears when a valid reference source is connected andlocked, based on the reference
input settings.
Appears to the left of the duration display when your Blackmagic URSA Broadcast G2 is
using a windowed sensor mode.
Gain
The ‘Gain’ indicator displays your URSA Broadcast G2’s current gain setting, or light sensitivity.
Tapping this indicator lets you adjust your gain to suit varying lighting conditions.
The optimum setting for URSA Broadcast G2 is 0dB.
Your URSA Broadcast G2’s gain indicator. Tap the indicator to access gain settings
While in the ‘gain’ menu, your URSA Broadcast G2’s gain settings
appear along the bottom of the LCD touchscreen. The slider and arrows
below the presets let you adjust the gain in 1/3 stop increments.
Depending on your situation, you may choose a lower or higher gain setting. For example,
inlowlight conditions +18dB can be suitable but may introduce some visible noise. In bright
conditions -6dB can provide richer colors.
White Balance
The ‘WB’ and ‘TINT’ indicators display your camera’s current white balance and tint. Tapping these
indicators lets you adjust your camera’s white balance and tint to suit varying lighting conditions.
Tap the white balance and tint indicators to access white balance and tint settings
72Touchscreen Controls
Loading ...
Loading ...
Loading ...