Blackmagic Design CINEURSAMWC6KG2 User Manual

Loading ...

When setting white balance automatically, a square will be overlaid on the center of your image.

Fill this square with a neutral surface such as a white or gray card and tap ‘update.’ Your URSA

Broadcast G2 will automatically adjust its white balance and tint values to ensure that the

average of the white or gray within the white balance square is as neutral as possible. Once

updated, this will be set as your camera’s custom white balance.

Tapping the ‘AWB’ icon in the white balance menu will bring up theauto white balance screen.

Use this with a white or neutralgray surface to automatically set a neutral white balance

Power

Your URSA Broadcast G2’s power status is displayed in the top right of the LCD screen.

There are five possible indicators:

Your URSA Broadcast G2’s power indicator is at the top right of the LCD touchscreen.

Whileusingbattery power, tapping this toggles between ‘voltage’ and ‘percentage’ displays

AC Displayed when your URSA Broadcast G2 is plugged into mainspower.

Percentage

If you are using a percentage accurate battery and plate combination and

have your battery display set to ‘percentage,’ theindicator will display your

battery level as a percentage. At20% charge remaining,

the indicator will turn red.

Battery bars

If your battery display is set to ‘percentage’ but your battery plate

andbattery combination does not support percentage accurate battery

information, your URSABroadcast G2 will display abattery icon that drains

in 25% increments. At 20% charge remaining, the battery bar will turn red.

Voltage

When your battery display is set to ‘voltage,’ this indicator will display your

battery’s remaining voltage. When your battery drops below 12.5 volts,

this indicator will turn red. Your URSA Broadcast G2 will automatically shut

down once the battery reaches 11.9 volts.

Fiber

Displayed when you have Blackmagic Camera Fiber Converter attached to

your camera and are powering thecamera through theSMPTE fiber cable.

If you have an XLR power cable plugged into URSABroadcast G2 whilst

the converter is attached, the AC icon will be displayed instead.

74Touchscreen Controls

Loading ...

Blackmagic Design CINEURSAMWC6KG2 URSA Broadcast G2 Camera