Loading ...
Loading ...
Loading ...
The ‘shortcuts’ settings in URSA Viewfinder
Setup
The ‘setup’ menu provides the following features:
Brightness Adjustment
Allows adjustments for the brightness of the display with range -10 to +10.
Tally Brightness
Allows adjustments of tally LED brightness.
Focus Chart
Your Blackmagic URSA Viewfinder has a built in focus chart so you can focus the eye
piece to suit your eyes. Simply turn the focus diopter on the eyepiece until the chart is
in perfect focus. Pressing any button on your viewfinder will close the focus
chart display.
Frame Guides
Toggles the appearance of frame guides. When ‘frame guides’ are turned ‘on’ in your
URSA Broadcast G2’s ‘front SDI’ monitor settings, you can use this setting to toggle the
appearance of these guides in your Blackmagic URSA Viewfinder.
For more information, see the ‘Monitor Settings’ section in this manual.
Safe Area Guide
Toggles the appearance of a safe area guide. When ‘safe area guide’ is turned ‘on’
inyour URSA Broadcast G2’s ‘front SDI’ monitor settings, you can use this setting
toggle its appearance in your Blackmagic URSA Viewfinder.
For more information, see the ‘Monitor Settings’ section in this manual.
Grid
Toggles the appearance of a rule of thirds grid, crosshair or center dot. When ‘grids’
areturned ‘on’ in your URSA Broadcast G2’s ‘front SDI’ monitor settings, you can use
this setting toggle their appearance in your Blackmagic URSA Viewfinder.
For more information, see the ‘Monitor Settings’ section in this manual.
NOTE Enabling ‘Grid’ in your URSA Viewfinder setup menu will also allow your
viewfinder to display tally signals sent from an ATEM switcher. Overlays must
also be set to ‘on’ in the display menu.
131Blackmagic URSA Viewfinder
Loading ...
Loading ...
Loading ...