Loading ...
Loading ...
Loading ...
Resolution Codec Max Frame Rate Max Data Rate
HD
1920x1080 Blackmagic RAW 3:1 150 161.4 MB/s
1920x1080 Blackmagic RAW 5:1 150 97.2 MB/s
1920x1080 Blackmagic RAW 8:1 150 61.1 MB/s
1920x1080 Blackmagic RAW 12:1 150 41 MB/s
1920x1080 Blackmagic RAW Q0 150 121.2 - 241.6 MB/s
1920x1080 Blackmagic RAW Q1 150 81.8 - 193.4 MB/s
1920x1080 Blackmagic RAW Q3 150 54.4 - 138.4 MB/s
1920x1080 Blackmagic RAW Q5 150 33 - 81.1 MB/s
1920x1080 ProRes HQ 120 110 MB/s
1920x1080 ProRes 422 120 74 MB/s
1920x1080 H.264 SDI 60 14 MB/s
1920x1080 H.264 High 60 11.2 MB/s
1920x1080 H.264 Medium 60 6.4 MB/s
1920x1080 H.264 Low 60 3.6 MB/s
It’s important to note that Blackmagic RAW Q0, Q1, Q3 and Q5 use variable bit rate compression
to achieve constant quality. Q0, Q1, Q3 and Q5 data rates depend on the complexity of the
image subject matter and can vary considerably throughout a clip.
To select your desired codec and resolution:
1 Press the ‘menu’ button on the control panel.
2 Navigate to the first page of the ‘record’ tab.
3 Tap your desired combination of codec, quality, and resolution.
4 Press ‘menu’ to exit.
Recording Formats and Project Frame Rates
After setting your codec and resolution, you should set your ‘project’ and ‘sensor’ frame rates.
Refer to the ‘recording’ section in this manual for more information about frame rates.
The project frame rates available are:
23.98, 24, 25, 29.97, 30, 50, 59.94, and 60 frames per second.
When using Blackmagic RAW and ProRes codecs up to ProRes 422 HQ, the maximum project
frame rate is 60 frames per second at all resolutions.
35Recording
Loading ...
Loading ...
Loading ...