Loading ...
Loading ...
Loading ...
Use the supplied AC to 12V DC adapter to power your Blackmagic URSA Broadcast G2
Blackmagic URSA Broadcast G2 comes fitted with an URSA VLock Battery Plate. This lets you use
industry standard V mount batteries with your camera. Refer to the ‘mounting batteries’ section for
more information about mounting different types of battery plates to support different batteries.
To turn on URSA Broadcast G2:
1 Move the power switch, located above the fold out LCD, to the ‘on’ position.
2 To turn the camera off, move the switch to the ‘off’ position.
You are now ready to insert your media and start recording!
Move the power switch to ‘on’ to power your camera
URSA Broadcast G2 also features a redundant power switch, which allows the camera to be turned
on and off by holding down the ‘rec’ and ‘forward skip’ buttons on the inside control panel. While
you wouldn’t normally power your camera using this method, it is provided as a helpful alternative
if the power switch along the top edge is obscured, for example when mounted on a custom rig.
8Getting Started
Loading ...
Loading ...
Loading ...