Loading ...
Loading ...
Loading ...
7
If you want to use a battery plate with URSAMini
Recorder, use a 2mm hex key driver to remove the
four M3 screws holding the molex socket cover
panel in place. Once the molex socket is uncovered,
attach a battery plate using the steps outlined in the
section ‘mounting batteries’ in this manual.
Using URSA Mini Recorder
When URSA Mini Recorder is connected and an SSD is loaded, the recorder occupies slot 3
in URSA Broadcast G2’s operating system. You’ll see an ‘SSD’ indicator over slot 3 on your
camera’s storage manager when URSA Mini Recorder is in use.
This means that recording, playback and storage management is exactly the same for SSDs as
it is for CFast or SD cards. For general information on storage management, as well as specific
instructions for choosing SSDs, see the ‘storage media’ section of this manual.
Status LEDs
URSA Mini Recorder has one status light on the left side for ‘SSD.’ The brightness of this
indicator can be set to ‘low,’ ‘medium,’ ‘high’ or ‘off’ in your camera’s ‘setup’ menu.
205URSA Mini Recorder
Loading ...
Loading ...
Loading ...