Loading ...
Loading ...
Loading ...
Characteristics of various light sources may still cause flicker even when using flicker free
shutter values. We recommend performing a test shoot when not using continuous lights.
Drop Frame Timecode
Use the ‘drop frame timecode’ option to use drop frame timecode when using NTSC project
frame rates of 29.97 and 59.94. Drop frame timecode drops a small number of frames from the
timecode at set intervals. This keeps your project timecode accurate despite each second not
containing a whole number of frames at NTSC frame rates.
Display ND Filter As
Use this setting to adjust how the ND filter indicator on your URSA Broadcast G2 displays your
NDfilter setting. Each setting corresponds to a different camera convention. Cinematographers
typically use ND.number notation, while those familiar with DSLRs or broadcast cameras may
prefer this information in f-stop format, or as a fraction of available light.
These options are available here as ‘number,’ ‘stop,’ and ‘fraction,’ respectively.
Setup menu in URSA Broadcast G2 with the option to
customize how the ND filter information is displayed
Setup Settings Page 2
The second page of your URSA Broadcast G2’s ‘setup’ tab contains the following settings.
ATEM Camera ID
If you’re using URSA Broadcast G2 with an ATEM Switcher and want your camera to receive
tally signals from the switcher, you’ll need to set the camera number on your camera. This
ensures the switcher sends the tally signal to the correct camera. The camera number can
be set to a value of 1-99 by tapping the left or right buttons. The default setting is 1.
100Settings
Loading ...
Loading ...
Loading ...