Loading ...
Loading ...
Loading ...
Your ATEM switcher will display gain in dB. This corresponds to the gain settings on your
camera in the following way:
Gain
-6
0
+6
+12
+18
The gain settings are displayed
using dB indicators
Shutter Speed Control
Shutter speed control is used to change your URSA Broadcast G2’s shutter speed.
The shutter speed control is located between the color wheel and the iris/pedestal control.
Decrease or increase the shutter speed by hovering your mouse pointer over the shutter speed
indicator and clicking the left or right arrow.
Hovering your mouse pointer over the gain, shutter
speed and white balance indicators reveal arrows
youcan click on to adjust their respective settings
NOTE As ATEM shutter speed control takes priority over the shutter speed selected
on your URSA Broadcast G2, your camera’s shutter speed controls are disabled when
connected to an ATEM switcher.
The table below shows the available shutter speeds in shutter speed control and their
equivalent shutter angles. It’s worth noting that some shutter speeds fall outside of URSA
Broadcast G2’s minimum and maximum shutter angles of 11.25 and 360 degrees, respectively.
Ifthis happens, the closest available shutter angle is used.
When your URSA Broadcast G2 is connected to an ATEM switcher, the shutter speed setting is
alsobe visible in your camera’s touchscreen status display. It is visible in an URSA Viewfinder
ifattached.
212Understanding Studio Camera Control
Loading ...
Loading ...
Loading ...