Loading ...
Loading ...
Loading ...
How to Update the Camera Software
After installing the latest Blackmagic Camera Setup utility on your computer, connect a USB
cable between the computer and your Blackmagic URSA Broadcast G2. The USB port is
located on the left side panel above the memory card slots.
Launch the Blackmagic Camera Setup utility and follow any on screen prompt to update the
camera software. It’s important to note that updating your camera software erases any presets
and custom LUTs, and resets all settings. It is a good practice to export them to a memory card
as a backup before performing a software update. After a software update, you can restore
your presets and LUTs quickly by importing them from the memory card.
The USB-C port is used to update the camera software and can be found above the memory
card slots, next to the media selection switch on Blackmagic URSA Broadcast G2
Working with Third Party Software
To edit your clips using your favorite editing software, you can copy your clips to an internal or
external drive or RAID and then import your clips into the software. Or import your clips directly
from your storage media using a dock or adapter for your CFast or SD card or SSD.
NOTE Blackmagic RAW is supported on URSA Broadcast G2 with DaVinci Resolve
16.1.2 and later and has also been adopted by a wide range of third party post-
production editing programs. Plugins for editing Blackmagic RAW in Avid Media
Composer and Adobe Premiere Pro are available with Blackmagic RAW software,
which you can download from www.blackmagicdesign.com/support.
251Working with Third Party Software
Loading ...
Loading ...
Loading ...