Loading ...
Loading ...
Loading ...
Use the touch keyboard to enter lens data if it is not provided automatically
Iris
Shows the iris aperture setting at the start of your clip. If this information is supplied
automatically it can be displayed in f- or T-stops depending on your lens. If the iris
information for your lens is not automatically shown here, you can tap this setting
to enter the data manually.
Focal length
Shows the focal length setting of the lens at the start of the recorded clip. When
automatically supplied, this is shown in millimeters. If the focal length information for your
lens is not automatically shown here, you can tap this setting to enter the data manually.
Distance
Shows the focus distance settings of the lens for the recorded clip. Some lenses can
provide this data automatically and it will be provided in millimeters. If the focal distance
information for your lens is not automatically shown here, you can tap this setting to
enter the data manually.
Filter
Shows the current lens filters used. Tap this setting to enter data manually. You can
make multiple entries separated by commas.
Filter information needs to be entered manually
Reset lens data
You can clear lens data at any time by tapping the ‘reset data’ button. You will be prompted
to confirm your choice. This will reinitialize communication with your lens and refresh the
electronically populated data, any fields that have been manually added will also be cleared.
123Entering Metadata
Loading ...
Loading ...
Loading ...