Loading ...
Loading ...
Loading ...
Tap the storage indicators on your URSA BroadcastG2’s
LCDtouchscreen to access the storage manager
This menu displays the amount of free space on each CFast card, SD card, USB-C flash disk or
SSD currently connected to your URSA Broadcast G2, as well as the name of the card or drive,
remaining record time, total number of clips, and the file format for each card or drive. Tapping
the card or drive name in the storage menu sets it as the active card or drive. Your URSA
Broadcast G2 will fill this card first.
You can format your media from this menu. For more information on formatting media using
URSA Broadcast G2, see the ‘preparing media on Blackmagic URSA Broadcast G2’ section
ofthis manual.
Audio Meter
The peak audio meters display audio levels for channels 1 and 2 when using the internal
microphone, or via external audio when connected. You can display PPM or VU meters.
To change the meter type, see the ‘setup’ settings later in this manual.
To achieve optimum audio quality, ensure your audio levels do not reach 0 dBFS. This is the
maximum level that your camera can record, meaning that any audio that exceeds this level
will be clipped, resulting in distortion.
The colored bars on the audio meter represent peak audio
levels. Ideally your peak audio levels should fall in the upper
end of the green zone. If your peaks enter into the yellow
or red zones your audio is in danger of clipping.
You can tap the audio meter to bring up volume controls for audio input channels 1 and 2,
aswell as headset or speaker volume.
78Touchscreen Controls
Loading ...
Loading ...
Loading ...