Blackmagic Design CINEURSAMWC6KG2 User Manual

Loading ...

When selecting ‘factory reset’ you will be prompted to confirm your action

Motion Sensor Calibration

To calibrate the horizon meter on URSA Broadcast G2, place your camera on a surface you

know is level and tap the ‘calibrate motion sensor’ button. It is essential that you keep the

camera stable during calibration. The process takes approximately five seconds to complete.

Pixel Recalibration

The CMOS sensor used in your URSA Broadcast G2 is made up of millions of pixels that

respond to light. As a result, they become more visible and become what is known commonly

as hot pixels. All camera sensors, regardless of manufacturer, will develop this variation in pixel

brightness over time.

To solve this, URSA Broadcast G2 has a built in recalibration feature that you can run if you see

any pixels that are brighter than others.

To begin this process, simply put on the lens cap and run the pixel recalibration feature by

tapping the ‘calibrate image sensor’ button, then tap ‘calibrate’ to confirm your choice. The

process takes approximately one minute to complete.

LCD White Balance Calibration

To perform LCD white balance calibration, adjust the ‘LCD temperature’ and ‘LCD tint’ controls

so that the two reference patches look neutral. After you change the settings, you can use the

‘reset’ button to return the controls to the factory calibration. The ‘restore’ button brings back

your new settings, which helps you compare the appearance before and after calibration.

Whenthe LCD shows an accurate white balance, save your settings.

112Settings

Loading ...

Blackmagic Design CINEURSAMWC6KG2 URSA Broadcast G2 Camera