Blackmagic Design CINEURSAMWC6KG2 User Manual

Loading ...

To set these buttons, use the arrows to select a function button and then its behavior, asetting,

and aparameterfor that setting.

1 2

1 Button 2 Behavior 3 Setting 4 Parameter

Function Button Behaves as Preset or Toggle

Once you have selected the function button you want to map, you can select a behavior.

Theavailable options are:

 Preset

When set to this behavior, pressing a function button will recall a combination of a

setting and a parameter.

To set a preset, select the setting you want to use from the ‘setting’ menu, and adjust

that setting by tapping the arrow icons on either side of the ‘parameter’ menu.

For example, to set the F1 button to recall a preset white balance, use the ‘set function

button’ arrows to select ‘F1’, select the ‘preset’ behavior, tap the ‘WB’ setting, and tap

the arrows on either side of the ‘parameter’ menu until you get to WB ‘5600K’ and

Tint ‘-20’.

 Toggle

When set to this behavior, pressing a function button will toggle a particular setting on

or off. The ‘setting’ menu is grayed out in this mode. Instead, tap the left or right arrows

in the parameter menu to scroll through the available options. These are ‘clean feed’,

‘display LUT’, ‘frame guides’, ‘focus assist’, ‘false color’, ‘zebra’, ‘grid’, ‘safe area guide’,

‘off speed recording’, ‘record’, ‘program return’, ‘color bars’, ‘push to talk’, ‘focus zoom’

and ‘none’.

When ‘focus zoom’ is enabled, you can use the menu wheel on the forward control

panel to move the region of zoom and adjust the magnification level. Pressing the

menu wheel toggles between zoom and magnification adjustment. For information on

how to use ‘focus zoom’ when it is enabled on the LCD, see the ‘focus zoom’ section.

Using the ‘toggle’ behavior also lets you select the output this setting applies to.

Simply tap any combination of ‘LCD,’ ‘front SDI’ and ‘main SDI’ to select. Ifthe output

for an option is not available, such as ‘color bars’ which always applies to all outputs,

the ‘LCD,’ ‘front SDI’, and ‘main SDI’ settings are disabled.

For example, you can configure URSA Broadcast G2 to use the ‘ret’ and ‘vtr’ buttons

on a B4 lens as function buttons. If ISO recording is happening with a HyperDeck,

a popular option is to set ‘vtr’ to act as a ‘push to talk’ button.

103Settings

Loading ...

Blackmagic Design CINEURSAMWC6KG2 URSA Broadcast G2 Camera