Loading ...
Loading ...
Loading ...
You can power off your URSA Broadcast G2 by tapping ‘power off’ in the top right corner.
You will be prompted to confirm your selection
before your camera is powered off
When Bluetooth is enabled and URSA Broadcast G2 is powered off, the name of your camera
will still show up on the list of available devices in the Blackmagic Camera Control App. Since
you have already paired with your camera, you can now switch it on remotely by selecting your
camera name and tapping ‘Connect’. Your camera will not show up in this list if Bluetooth
is disabled.
Setup Settings Page 9
The ninth page of your URSA Broadcast G2’s ‘setup’ tab contains the following settings.
Factory Reset
To reset the camera to its default factory settings, tap the ‘reset camera’ button. You will be
asked to confirm this action as it will erase any LUTs and presets currently stored on the
camera. Tap ‘reset’ on the confirmation page to reset your camera settings.
It’s important to note that a factory reset erases any presets and custom LUTs, and resets all
settings. It is a good practice to export them to a memory card as a backup before performing
a factory reset. After a factory reset, you can restore your presets and LUTs quickly by
importing them from the memory card.
111Settings
Loading ...
Loading ...
Loading ...