Loading ...
Loading ...
Loading ...
Tools Required
When attaching the EF mount, you will need a 2mm Hex driver. While it’s not absolutely
required, we recommend using a torque wrench able to accurately set a maximum torque
of 0.45Nm to reduce the potential of over tightening the screws.
2mm Hex driver
Attaching the EF Mount
1 2
Place Blackmagic URSA Broadcast G2 vertically
ona solid, clean bench top toensure that the mount
can be inserted vertically. If changing from the PL to
the EFmount, ensure that you have removed thePL
baffle before inserting the EF mount.
Carefully place the Blackmagic URSA MiniPro
EFmount onto the camerabody ensuring the
reddot is at the 12o’clock position.
3 4
1 3
4 2
Loosely turn the four mounting screws until initial
contact is made with the shoulder of the lensmount.
Using the 2mm Hex driver, or torque wrench with
2mm Hex key, apply one full turn of pressure to
mounting screw 1, followed by one full turn to screw
2, and repeat for screw 3 and then 4. Continue to
apply one full turn to each screw in the sequence
above until all screws have reached the maximum
torque of 0.45Nm.
NOTE When removing the EF mount, simply follow the instructions in reverse order
from step 4 to step 1.
191Interchangeable Lens Mount
Loading ...
Loading ...
Loading ...