Loading ...
Loading ...
Loading ...
Now that the units are attached to the brackets, you can attach the brackets to the tripod arms.
One end of each bracket contains a ‘T’ shaped latch that hinges into a slot and is then tightened.
1 Loosen the latch by unscrewing the latch knob in a counterclockwise motion. This will
release the ’T’ shaped latch.
2 With the latch open, place the bracket onto the tripod arm and clamp the bracket shut by
closing the latch into its fastening slot. Rotate the bracket to your preferred position on the
tripod arm.
3 Tighten the latch knob to secure the bracket to the tripod arm.
Connecting to Your Camera
Blackmagic Focus and Zoom Demands have two USB-C ports. This lets you use one unit
individually, or both units together.
Each unit is supplied with a 1 meter long USB-C cable which is connected directly from your
URSA Broadcast G2’s rear USB-C port to the demand unit’s ‘cam’ port.
If you are using both demand units, daisy chain them together by connecting the first unit to
thesecond unit via USB-C.
Blackmagic
Focus Demand
Blackmagic
Zoom Demand
Blackmagic
URSA Broadcast G2
Rear
USB-C port
USB-C
CAM
USB-C
LOOP
USB-C
CAM
USB-C
CAM
LOOP
ON OFF
Daisy chaining allows for both units to be controlled using the rear USB-C port on your
URSABroadcast G2. For example, connect a USB-C cable into your camera’s rear USB-C port
and connect the other end of the cable into the focus demand’s ‘cam’ port. With a second
cable, plug the focus demand’s ‘loop’ port into the zoom demand’s ‘cam’ port.
147Blackmagic Zoom and Focus Demands
Loading ...
Loading ...
Loading ...