Loading ...
Loading ...
Loading ...
970| Editing the Samples
Accessing the Sample Record page
> While in the main page of the Sample Edit mode, touch the Record tab to go
to the Sample Edit > Main > Record page.
Enabling the audio source and adjusting the levels
1 While in the Sample Edit > Main > Record page, use the Source pop-up menu
to choose the input source.
2 If you are recording from the line inputs, use the Record Mode pop-up menu
to choose one or both stereo channels.
3 Adjust the source’s volume. If you are recording with a microphone or gui-
tar, use the corresponding GAIN knob of the back of the instrument. If you are
sampling from a line source (like an external player or another instrument), set
the source’s own output level. If possible, set the output level of the source to be
sampled to the maximum.
Watch at the meters in the display to check the input level. The better level is be-
tween -3dB and 0dB. Ideally, you should never go to 0dB. When the
Clip indicators
turn red, the signal is too hot and is clipping (distorting).
Should clipping happen, the Clip indicators would turn red. Touch one of them to
reset these indicators.
Loading ...
Loading ...
Loading ...