Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/8237195-pa5x61/bg42b.png)
Editing the effects |1053
▪ Notes about the Gate modulation sources
Gate 1+Dmpr is at maximum during note-on, and will stop when all keys are re-
leased. The effect will remain at maximum even after the keys are released, as
long as the damper (sustain) pedal is pressed.
Gate1,Gate1+Dmpr
Gate1
Note
Dmpr
1
2
3
1
2
3
Damper Pedal
Gate1+Dmpr
Time
On
Off
Gate2, Gate2+Dmpr (Gate2+Damper) is essentially the same as for Gate 1 or Gate
1 + Dmpr. However when Gate 2 or Gate 2 + Dmpr are used as a dynamic modula-
tion source for the Envelope Generator, a trigger will occur at each note-on. (In
the case of Gate 1 and Gate 1 + Dmpr, the trigger occurs only for the rst note-on.)
Gate2,Gate2+Dmpr
Gate2
Note
Dmpr
1
2
3
1
2
3
Damper Pedal
Gate2+Dmpr
Time
On
Off
▪ Set the modulation intensity
> While in the FX Edit page (for both the insert or master effects), use the Amt
(Amount)
parameter to set the intensity of modulation. This is an offset to the
normal value received from the source.
Loading ...
Loading ...
Loading ...