Loading ...
Loading ...
Loading ...
926| Editing the Sounds
Modulating the Filter EG times
> Use the Time Modulation > AMS 1/2 parameters to select a modulation
source for the Time parameters of the lter EG.
> Use the Time Modulation > Intensity parameters (-99…+99) to specify the
depth and direction of the effect that the AMS will have on the Time parameters.
With a value of 0, the lter EG times will be just as specied by the Time settings.
For example, if the AMS is set to FltKTr +/+, the EG Time parameters will be con-
trolled by the Keyboard Tracking settings. With positive (+) values of this parame-
ter, positive (+) values of Ramp Low/High will lengthen the EG times, and negative
(–) values of Ramp Low/High will shorten the EG times. The direction of change
is specied by At (Attack Time Swing), Dc (Decay Time Swing), Sl (Slope Time
Swing), and Rl (Release Time Swing).
With a value of 0, the times specied by the
Frequency parameter will be used.
If the AMS is set to Velocity, positive (+) values of this parameter will cause EG
times to lengthen as you play more strongly, and negative (–) values will cause EG
times to shorten as you play more strongly.
> Use the At (Attack Time Swing), Dc (Decay Time Swing), Sl (Slope Time
Swing) and Rl (Release Time Swing) parameters to specify the direction in which
the AMS will affect the Time > Attack, Decay, Slope and Release parameters.
With positive (+) values of Intensity, a setting of + will cause the time to be length-
ened, and a setting of – will cause the time to be shortened. With a value of 0 there
will be no change.
Filter 1 EG changes (Time) (AMS = Velocity, Intensity = a positive (+) value)
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
Softly played note with Attack,
Decay, Slope and Release
Level Swings set to +
Strongly played note with
Attack, Decay, Slope and
Release Level Swings set to +
Strongly played note with
Attack, Decay, Slope and
Release Level Swings set to –
Loading ...
Loading ...
Loading ...