Loading ...
Loading ...
Loading ...
Effect parameters |1345
h [G]Polarity +, – Switches between non-invert and invert of the
gate on/off state
i [G]Attack 1…100 Sets the attack time
Release 1…100 Sets the release time
j Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources)
at the beginning of this part
Amt –100…+100 Amount of modulation source
▪ f: [G]Envelope Select
▪ f: Src
▪ g: [G]Input Reverb Mix
▪ g: Threshold
The “[G]Envelope Select” parameter enables you to select whether turning the
gate on and off is triggered by the input signal level or controlled directly by the
modulation source. You can select from Off to Tempo for the Src parameter to
specify the modulation source.
When “[G]Envelope Select” is set to Input, the gate is controlled by the level of
signals that are the combination of the dry sound and the reverb sound. When the
signal level exceeds the threshold, the gate opens and the reverb sound is output.
Normally, set “[G]Input Reverb Mix” to Dry (the gate is controlled only by the dry
sound). If you wish to extend the gate time, set the “[G]Input Reverb Mix” value
higher and adjust the “Threshold” value.
Loading ...
Loading ...
Loading ...