Loading ...
Loading ...
Loading ...
Troubleshooting |1549
Troubleshooting
In case of problems, please check the following list to nd a solution.
Problem Solution
General problems
Power does not turn on Make sure that (1) the power cable is plugged into the outlet,
(2) the cable is plugged into the connector on the back of the
instrument, (3) and is not damaged, (4) there are no problems
with the mains.
Is the POWER indicator turned on?
If the power still does not turn on, contact your dealer or the
nearest KORG Service Center.
Power does not turn off Press the POWER button again and keep it pressed for a few
seconds. At the end, the button’s indicator will turn off, and the
instrument will be set to standby.
No sound Is the MASTER VOLUME slider set to a position other than ‘0’?
Is a jack inserted into the HEADPHONES connector? Unplug it.
Check the connections to your amp or mixer.
Make sure that all the components of the amplifying system
are turned on.
Is the Local Control parameter set to off (in the Settings > MIDI
> General Controls page)? Turn it on.
Is the Attack parameter value of the selected Sound too high?
Set it to a lower value, to let the sound start faster. Is the Volume
parameter too low? Set it to a higher value.
Lowest note are not played When the SPLIT indicator is turned on, the keyboard is divided
into a Lower part (lower notes, below the split point) and an
Upper part (higher notes, above the split point). Is the Lower
part muted? Unmute it (in the Home > Keys pane).
Wrong sounds Do the User banks contain modied data? Load the appropriate
data for the Song or the Style you wish to play.
Has one of the User Drum Kits been replaced? Load the ap-
propriate Drum Kits.
Have the Styles or Keyboard Sets been replaced? Load the ap-
propriate data.
Sound does not stop Keep the SHIFT button pressed, and press the RESET/TAP but-
ton to send a Panic message, and turn all notes off.
Make sure that the Damper pedal calibration is correctly set.
Loading ...
Loading ...
Loading ...