Loading ...
Loading ...
Loading ...
940| Editing the Sounds
Modulating LFO frequency
Use the Frequency Modulation parameters to set the two alternate modulation
sources to adjust the speed of the LFO for the selected oscillator.
> Use the AMS 1/2 pop-up menus to choose the modulation sources that will
adjust the frequency of the selected oscillator’s LFO. LFO 1 can be modulated by
LFO 2.
> Use the Intensity parameters (-99…+99) to set the modulation depth and
direction.
This parameter species the depth and direction of the effect that the AMS will
have. When this parameter is set to a value of 16, 33, 49, 66, 82, or 99, the LFO
frequency being can be increased by a maximum of 2, 4, 8, 16, 32, or 64 times
respectively (or decreased by 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64 respectively).
For example, if the AMS is Note Number, positive (+) values of this parameter will
cause the oscillator LFO to speed up as you play higher notes. Negative (–) values
will cause the oscillator LFO to slow down as you play higher notes. This change
will be centered on the C4 note.
If the AMS is set to JS +Y, raising the value of this parameter will cause the oscil-
lator LFO 1 speed to increase as the joystick is moved away from yourself. With a
value of +99, moving the joystick all the way away from yourself will increase the
LFO speed by approximately 64 times.
Loading ...
Loading ...
Loading ...