Loading ...
Loading ...
Loading ...
Effect parameters |1267
Decimator + Compressor
This effect combines a mono decimator and a compressor. You can change the
order of the effects.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Decimator
Routing
Pre LPF
High Damp
Output Level
Decimator
Resolution
Compressor
Comp
Output Level
Envelope - Control
DECIMATOR
a [D]Pre LPF Off, On Turn the harmonic noise caused by lowered
sampling on and off
High Damp [%] 0…100 Sets the ratio of high-range damping
b [D]Sampling Freq [Hz] 1.00k…48.00k Sets the sampling frequency
Resolution 4…24 Sets the data bit length
c [D]Output Level 0…100 Sets the decimator output level
COMPRESSOR
d [C]
Sensitivity
1…100 Sets the sensitivity
e [C]Attack 1…100 Sets the attack level
Output Level 0…100 Sets the compressor output level
f Routing Decimator › Comp,
Comp › Decimator
Switches the order of the decimator and
compressor
g Wet/Dry Dry, 1:99…99:1, Wet Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation
Sources) at the beginning of this part
Amt –100…+100 Amount of modulation source
Loading ...
Loading ...
Loading ...