Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/8237195-pa5x61/bg3a5.png)
Full editing of the Sounds |919
tion can be specied by the Key Low, Key High, Ramp Low, Ramp High, and the
Intensity to A/B parameters.
Keyboard tracking will apply to the range below the specied Low note number,
and above the specied High note number.
> Use the Ramp Low/High parameters to specify the slope of the keyboard
tracking (-99…+99).
Cutoff frequency
Key
Low Ramp=+99
Low Ramp=+43
Low Ramp=0
Low Ramp=–62
Low Ramp=–99
High Ramp=+99
High Ramp=+62
High Ramp=0
High Ramp=–43
High Ramp=–99
Low Key
High Key
> Set the Intensity to A and Intensity to B parameters (-99…+99) to specify
the depth and direction of the changes applied to lters A and B.
For the range of notes between Key Low and Key High, the cutoff frequency will
change according to the keyboard location (pitch).
Modulating the Filter EG (Envelope Generator)
The lter envelope can be controlled while playing.
> Use the Velocity to A/B parameter (99…+99) to specify the depth and direc-
tion of the effect that velocity will have on the time-varying changes created by
the lter EG (as set on Filter > Filter EG) to control the lter A/B cutoff frequency.
With positive (+) values, playing harder will cause the lter EG to produce greater
changes in cutoff frequency. With negative (–) values, playing harder will also
cause the lter EG to produce greater changes in cutoff frequency, but with the
polarity of the EG inverted.
> Use the Int to A/B parameters (-99…+99) to specify the depth and direction
of the effect that the time-varying changes created by the lter EG will have on
the lter A/B cutoff frequency.
Loading ...
Loading ...
Loading ...