Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/8237195-pa5x61/bg21.png)
Connecting the audio outputs |19
When using a home audio amplier, connect the other end of the cable to the CD,
LINE IN or TAPE/AUX input of your audio system. Don’t use the PHONO inputs of
your audio system!
Pa5X’s AUDIO OUT
(2 x 6.35 mm / 1/4” unbalanced jacks)
Home amplication systems’s LINE/AUX IN
(2 x RCA connectors)
> Use the LEFT and RIGHT connectors as the main stereo outputs. Connect
either of them to output a mono signal. Adjust the output level with the MASTER
VOLUME slider.
> Use the 1-4 connectors as separate sub-outputs. These can be used as stereo
sub-mixes, or as individual outputs, to process and mix individual sounds with
an external mixer or amplication system. The sounds are sent to these outputs
with the Insert FXs applied. Master FX and the MaxxAudio are deactivated. The
MASTER VOLUME is not applied to these outputs. The X-FADER changes the bal-
ance between the Players on these outputs. Adjust their volume with the mixer’s
or external speaker’s level controls.
If installed, the (optional)
PaAS amplication system will work in parallel with the
main audio outputs.
Loading ...
Loading ...
Loading ...