Loading ...
Loading ...
Loading ...
Effect parameters |1289
a Delay Time [msec] 0.0…50.0 Sets the delay time from the original sound
b LFO Waveform Step-Tri,
Random
Selects the LFO Waveform
LFO Phase [degree] –180…+180 Sets the LFO phase difference between the left and
right
c LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects the modulation source used for both LFO
speed and step speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
d LFO Step Freq [Hz] 0.05…50.00 Sets the LFO step speed (speed that changes in
steps)
Step Amt –50.00…
+50.00
Sets the modulation amount of LFO step speed
e MIDI Sync Off, On When this is on, the LFO speed is set by BPM, Base
Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets the
tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO speed
Times x1…x32 Sets the number of notes that specify the LFO speed
f Step Base Note
…
Selects the type of notes to specify the LFO step
speed
Times x1…x32 Sets the number of notes to specify the LFO step
speed
g Depth 0…100 Sets the depth of LFO
modulation
h Feedback –100…+100 Sets the feedback amount
High Damp [%] 0…100 Sets the feedback damping amount in the high
range
i Wet/Dry -Wet, -1:99…
Dry…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources)
at the beginning of this part
Amt –100…+100 Amount of modulation source
Loading ...
Loading ...
Loading ...