Loading ...
Loading ...
Loading ...
1296| Effects for the Sounds
Stereo Envelope Phaser
This stereo phaser uses an envelope generator for modulation. You will obtain
the same pattern of phasing each time you play. You can also control the Phaser
directly using the modulation source.
EG Attack/Decay
EG
D-mod
Sweep Mode
D
-mod
Phaser
Phaser
Left
Right
Resonance
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
a L Manu Bottom 0…100 Sets the lower limit of the frequency range for the effect
on the left channel
L Manu Top 0…100 Sets the upper limit of the frequency range for the effect
on the left channel
b R Manu Bottom 0…100 Sets the lower limit of the frequency range for the effect
on the right channel
R Manu Top 0…100 Sets the upper limit of the frequency range for the effect
on the right channel
c Sweep Mode EG, D-mod Determines whether the anger is controlled by the enve-
lope generator or by the modulation source
Src Of f…Tempo Selects the modulation source that triggers the EG (when
EG is selected for Sweep Mode), or modulation source that
causes the anger to sweep (when D-mod is selected for
Sweep Mode). See the list of DMS (Dynamic Modulation
Sources) at the beginning of this part
d EG Attack 1…100 Sets the EG attack speed
EG Decay 1…100 Sets the EG decay speed
e Resonance –100…+100 Sets the resonance amount
f High Damp [%] 0…100 Sets the resonance damping amount in the high range
Loading ...
Loading ...
Loading ...