Loading ...
Loading ...
Loading ...
928| Editing the Sounds
▪ Setting the pan’s basic position
> Use the Pan > Level parameter to set the stereo position (panorama) of the
selected oscillator.
This parameter is not available when editing a Drum Kit. Use the individual Pan
control for each key instead (see the
Sound Edit > Drumkit > Voice/Mixer page).
Pan Meaning
Random The sound will be heard from a different location at each note-on.
L-63…C00…R+63 Sound placed from Left (L) to Right (R). A value of C00 is Center (C).
The pan of a Sound can be controlled by CC#10 (Pan). A CC#10 value of 0 or 1 will
place the sound at the far left, a value of 64 will place the sound at the location
specied by the Pan setting for each oscillator, and a value of 127 will place the
sound at the far right.
Modulating the pan position
Modulating the pan position makes the sound live between the stereo channels.
> Use the AMS pop-up menu to choose the modulation source that will modify
the pan. This change will be relative to the Pan setting.
The
Intensity parameter (-99…+99) species the depth of the effect produced
by AMS. For example, if Pan is set to C064 and AMS is Note Number, positive (+)
values of this parameter will cause the sound to move toward the right as the note
numbers increase beyond the C4 note (i.e., as you play higher), and toward the left
as the note numbers decrease (i.e., as you play lower). Negative (–) values of this
parameter will have the opposite effect.
Loading ...
Loading ...
Loading ...