Loading ...
Loading ...
Loading ...
Effect parameters |1273
e Tap4 (240) [msec] 0…2000 Sets the Tap4 (LFO phase=240 degrees)
delay time
Depth 0…30 Sets the Tap4 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation source for
the control of Tap4 output
f Tap5 (120) [msec] 0…2000 Sets the Tap5 (LFO phase=120 degrees)
delay time
Depth 0…30 Sets the Tap5 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation source for
the control of Tap5 output
g Tap6 (300) [msec] 0…2000 Sets the Tap1 (LFO phase=300 degrees)
delay time
Depth 0…30 Sets the Tap6 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation source for
the control of Tap6 output
h Panning Preset 1 : L 1 2 3 4 5 6 R,
2 : L 135 246 R,
3 : L 1 3 5 2 4 6 R,
4 : L 1 4 5 6 3 2 R
Selects the stereo panning pattern for
each tap
i Tap1 Feedback –100…+100 Sets the Tap1 feedback amount
Src Off…Tempo Selects the modulation source for the Tap
output level, feedback amount, and effect
balance
Amt –100…+100 Sets the modulation amount of Tap1 feed-
back amount
j Wet/Dry Dry, 1:99…99:1, Wet Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation
Sources) at the beginning of this part
Amt –100…+100 Amount of modulation source
▪ b, c, d, e, f, g: Status
These parameters set the output status of each Tap.
Always On: Output is always on. (No modulation)
Always Off: Output is always off. (No modulation)
Loading ...
Loading ...
Loading ...