Loading ...
Loading ...
Loading ...
934| Editing the Sounds
> Use the Level parameters (-99…+99) to specify the volume level that will be
reached at the end of the segment.
EG Level Meaning
Start Volume level at note-on. If you want the note to begin at a loud level,
set this to a high value.
Attack Volume level that will be reached after the attack time has elapsed.
Break (Break Point) Volume level that will be reached after the decay time has elapsed.
Sustain Volume level that will be maintained from after the slope time has
elapsed until note-off occur.
> Use the Time parameters (0…99) to specify the time over which the volume
level is reached.
EG Time Meaning
Attack Time over which the volume will change after note-on until it reaches
the attack level. If the start level is 0, this will be the rise time of the
sound.
Decay Time over which the volume will change from when it reaches the attack
level until it reaches the break point level.
Slope Time over which the volume will change from when it reaches the break
point level until it reaches the sustain level.
Release Time over which the volume will change after note-off until it reaches 0.
Modulating the Amp EG
▪ Modulating the Amp EG levels
> Use the Level Modulation > AMS parameter to select a modulation source for
the Level parameters of the Amp EG.
> Use the Level Modulation > Intensity parameters (-99…+99) to specify the
depth and direction of the AMS.
For example, if the AMS is Velocity, setting St (Start Level Swing), At (Attack Level
Swing) and Br (Break Point Level Swing) parameters to + and setting Intensity to
a positive (+) value, will cause the amp EG volume levels to increase as you play
harder. Setting Intensity to a negative (–) values will cause the amp EG volume
levels to decrease as you play harder. With a value of 0, the levels will be as speci-
ed on Level parameters.
Loading ...
Loading ...
Loading ...