Loading ...
Loading ...
Loading ...
Effect parameters |1135
Tape Echo BPM
This is a tape echo that lets you synchronize the delay time to the tempo of the
song.
Wah Flatter
D
-mod
Tap2/3 Position
+
Tape
Saturation
Left
Right
FX Amt
Trim
PanLevel
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
Feedback
Feedback Amt
High / Low DampPre Tone
Delay
(1)
(2)
(3)
Delay Time
PM
PM
ase ote Times
Tempo
a BPM (Delay) MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets the tempo
manually for this individual effect
Tap1 Dmod Src Off…Tempo Selects the modulation source of the delay time
b Tap1 Delay Note
…
Selects the type of notes to specify the delay time (tap1)
Times x1…x32 Sets the number of notes to specify the delay time (tap1)
Time Over? ---, OVER! Displays an error message when the delay time exceeds
the upper limit
c Tap1 Dmod Note
…
Selects the note value used to specify the delay time
when the modulation is at maximum
Times x1…x32 Species the number of notes used to specify the delay
time when the modulation is at maximum
d Tap2 Position
[%]
0…100 Sets the position of Tap 2 relative to the Tap 1 delay time
the depth of pitch variation
e Tap3 Position
[%]
0…100 Sets the position of Tap 3 relative to the Tap 1 delay time
the depth of pitch variation
f Tap1 Level 0…100 Sets the Tap1 output level
Pan L, 1…99, R Sets the stereo image of tap1
FB Amt –100…+100 Sets the Tap1 feedback amount
Loading ...
Loading ...
Loading ...