Loading ...
Loading ...
Loading ...
Effect parameters |1223
When “LFO Mode” is set to 1-Shot, the Doppler effect is created only once when
the modulation source specied in the “Src” eld is turned on. At this time if you
do not set the “Src” parameter, the Doppler effect will not be created, and no ef-
fect sound will be output.
The effect is off when a value for the modulation source specied for the
“Src” parameter is smaller than 64, and the effect is on when the value is 64 or
higher. The Doppler effect is triggered when the value changes from 63 or smaller
to 64 or higher.
▪ e: Pitch Depth
With the Doppler effect, the pitch is raised when the sound approaches, and the
pitch is lowered when the sound goes away. This parameter sets this pitch varia-
tion.
▪ f: Pan Depth
This parameter sets the width of the stereo image of the effect sound. With larger
values, the sound seems to come and go from much further away. With positive
values, the sound moves from left to right; with negative values, the sound moves
from right to left.
Pitch
Higher
Doppler - Pitch / Pan Depth
Lower
Original Pitch
Left
Center
Right
Pitch Depth
Pan Depth
< < < < < <<<<<< >>>>>> > > > > >
VolumeLouder
Louder
Pan Depth
= (–) value
Pan Depth
= (+) value
Loading ...
Loading ...
Loading ...