Loading ...
Loading ...
Loading ...
Audio Grooves |1003
Slicing
1 Go to the Sample Edit > Menu > Time Slice page.
2 Use the Meter parameter to specify the Meter of the original sample.
3 Use the Measures parameter to specify the length of the original sample in
measures. Preferably, you will load a groove 1- or 2-measures long.
4 The BPM (Beats Per Minute) parameter species the Tempo (in Beats Per
Minute) of the original sample. This value is automatically calculated, based on the
Start and End parameters (from the Sample Edit > Main page), and on the Meter
and Measures parameters (from this page).
If you know these data, manually enter the
Meter, Measures and BPM parameters,
to make the slicing more accurate. The BPM value can be only adjusted to values
lower than the one automatically calculated. This can be useful, for example, when
the actual sample is shorter than the entered Meter and Measures values.
Meas.1 Meas.2
In the example above, the actual groove lasts only up to the rst half of Measure 2.
The recognized Tempo may be 130, but you know that the real Tempo is 100. Set
the
BPM value to 100, and a rest will be added to the end of the groove, to allow
it to loop seamlessly.
5 Touch the Slice button to slice the original audio groove.
Loading ...
Loading ...
Loading ...