Loading ...
Loading ...
Loading ...
The user interface in detail |53
Virtual controllers
Virtual sliders
To change a virtual slider’s position, touch it and keep it held, then slide
up or down to change its position. As an alternative, touch it, then use
the DIAL or UP/DOWN buttons to change its position.
Depending on the status of the
CONTROL MODE indicator in the con-
trol panel, the position of the virtual sliders might match that of the
SLIDERS.
When moving a slider, the value of the controlled parameter can immediately jump
to the current slider/pedal value, or wait for it to reach the current parameter
value, and catch it only at that point. This depends on the
Catch/Jump settings
you can do in the Settings > Menu > Controllers > Hand page.
Virtual knobs
To change a virtual knob’s position, touch it and keep it held, then slide
your nger up (or right) to rotate it clockwise, or slide it down (or left)
to rotate the knob counter-clockwise. As an alternative, touch it, then
use the DIAL or UP/DOWN buttons to change its position.
Virtual drawbars
To change a virtual drawbar’s position, touch it and keep it held, then
slide it up or down to change its position. As an alternative, touch it, then
use the DIAL or UP/DOWN buttons to change its position.
If the status of the
CONTROL MODE indicator in the control panel is
DWB (DRAWBARS), the position of the virtual sliders matches that of
the SLIDERS.
Loading ...
Loading ...
Loading ...