Loading ...
Loading ...
Loading ...
18| Let’s start!
Connecting the audio
outputs
Connecting the headphones
Connect a pair of headphones to the PHONES connector. You can use headphones
with an impedance of 16-200 Ohms (50 Ohms suggested). When connecting the
headphones, the PaAS speakers are automatically deactivated.
Adjust the output level with the
MASTER VOLUME slider.
Connecting the line audio outputs
Use the AUDIO OUTPUT connectors to send the audio output to a mixer, a set of
powered monitors, or an audio amplication system. These are balanced/unbal-
anced (TRS) 6.35 mm, or 1/4”, jack connectors. (Please note that balanced con-
nectors and cables are also called stereo, while the unbalanced ones are called
mono).
Where possible, use all balanced connections, to reduce the risk of noise (hum)
occurring in the audio signal.
Pa5X’s AUDIO OUT
(2 x 6.35 mm / 1/4” balanced jacks)
Mixer’s/Amplication’s LINE IN
(2 x 6.35 mm / 1/4” balanced jacks)
Pa5X’s AUDIO OUT
(2 x 6.35 mm / 1/4” unbalanced jacks)
Mixer’s/Amplication’s LINE IN
(2 x 6.35 mm / 1/4” unbalanced jacks)
Loading ...
Loading ...
Loading ...