Loading ...
Loading ...
Loading ...
1180| Effects for the Sounds
f LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
g MIDI Sync Off, On When this is on, the LFO speed is set by BPM, Base
Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets the
tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO speed
Times x1…x32 Sets the number of notes that specify the LFO
speed
h Output Level 0…100 Sets the output level of the effect sound
Src Off…Tempo Selects the modulation source that will control the
effect output level
Amt –100…+100 Sets the modulation amount of the effect output
level
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources)
at the beginning of this part
Amt –100…+100 Amount of modulation source
▪ a: Shape
This parameter species the sweep curve of the wah. It applies to all control via
auto-wah, modulation source, and LFO, and lets you adjust subtle nuances of the
wah effect.
▪ a: Mode
▪ b: Frequency Bottom
▪ b: Frequency Top
▪ c: Resonance Bottom
▪ c: Resonance Top
If Mode=Preset, this simulates a vintage wah pedal. In this case, internally xed
values are used for Frequency Bottom/Top and Resonance Bottom/Top, and these
settings will be ignored. The settings for Frequency Bottom/Top and Resonance
Bottom/Top are valid if Mode=Custom.
Loading ...
Loading ...
Loading ...